RACINGLINE REAR BODY BRACE [VWR81G700]

RACINGLINE REAR BODY BRACE [VWR81G700]

$1,100.00

IMPORTANT:
Not to be used as a mounting point for seat belts or race harnesses.

TIGHTEN UP YOUR GOLF’S RESPONSES
Want to sharpen up your Golf 7 & 7.5 handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive.

Available on backorder (3-6 weeks)

Email when in stock

Compare
SKU: VWR A 81G700 Category: Tag:

Description

WHAT’S IN THE KIT?

4x Mounting brackets

1x Tensioning block

1x Carbon Cross Bar

2x Carbon Brace Bar

All required fitting hardware

WHY CHANGE?

Modern cars like the Golf 7 & 7.5 run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.

The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis.
By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do.
Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.

The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible.

Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace.

LOW PROFILE

Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation.

EASY INSTALL/REMOVE

Clever design means fitting is quick and simple. Completely reversible without trace for removal.

NO DRILLING

No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there’s no need to modify.

PRACTICAL

Compatible with rear seats up or down, and we’ve even added in the luggage tie-downs into the mounting points.

LIGHTWEIGHT

A ruthless approach to weight-saving. Billet aluminium mounting brackets bonded to ultra stiff 3K twill carbon link bars.

ADJUSTABLE

Every mass-produced car body has small differences in dimensions. The brace is tensioned after fitment for ultra-tight alignment to your car.

CONFIRMED APPLICATIONS

VWR81G700

GOLF 7 & 7.5 3 DOOR

GOLF 7 & 7.5 5 DOOR

GOLF 7 & 7.5 WAGON/VARIANT

VW Golf 7 & 7.5 2012+ 5G

VW Golf 7 & 7.5 GTI 2013+ 5G

VW Golf 7 & 7.5 R 2013+ 5G

VW Golf 7 & 7.5 GTI ClubSport 2016+ 5G

 

X