Want to sharpen up your Audi A3, S3, RS3, Octavia handling responses? Our beautiful billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive.
TIGHTEN UP YOUR DYNAMIC RESPONSES
WHAT DOES IT DO?
Modern cars like the MQB platform run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That’s why the Clubsport S Golf gets a factory rear brace.
The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.
The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis.
By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do.
Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.
The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible.
IMPORTANT:
Not to be used as a mounting point for seatbelts or race harnesses.
CONFIRMED APPLICATIONS
VWR8130S3
Audi 8V A3 / S3 / RS3 3 & 5 DOOR SPORTBACK (note: not for 4 door sedan models)
Audi A3 2013-2020 8V / 3 & 5 door
Audi S3 2013-2020 8V / 3 & 5 door
Audi RS3 2015-2020 8V / 5 door
WHAT’S IN THE KIT?
4x Mounting brackets
1x Tensioning block
1x Carbon Cross Bar
2x Carbon Brace Bar
All required fitting hardware