Volkswagen Transporter T6/T6.1 2.0 TDI Stage 1 ECU plus TCU Software for the 2015-2020 vans is now ready to launch!
RacingLine’s new VW Transporter calibrations provide a healthy boost in mid-range torque and top-end power. As you’d expect for this type of vehicle, there’s been a lot of development time spent focussing on ensuring enhanced drivability for these vans. All with the reassurance that it has been tested on road, track and dyno all over the world. And now, it’s ready to transform any VW Transporter, California, Caravelle, Kombi or any other T6/T6.1.
Of course, RacingLine ECU & TCU calibrations come with nice added features, including our new Theft Protect function which is sure to be popular with passionate van owners, plus compatibility with our PDM ‘Flash at Home’ system.
POWER GAINS:
204PS / 199PS 2.0 BiTDI
Stage 1 for 204PS & 199PS BiTDI is all about delivering a transformative power & torque gain right through the rev-range – over 100NM gain – all with no mechanical changes needed. And as the dyno graph shows all so clearly, it’s a night and day difference.
POWER GAINS:
150PS 2.0 TDI
As the dyno graph shows so clearly, Stage 1 for 150PS delivers over 60NM increase in torque, with smooth power gains right through the rev-range, all with no mechanical changes needed.
HARDWARE REQUIRED:
The 2.0 TDI Stage 1 Performance Calibrations require NO hardware/parts upgrades to achieve the quoted power outputs.
APPLICATIONS:
For all VW Transporter 2.0 TDI T6 & earlier T6.1
204PS, 199PS & 150PS EA288
Covering Transporter, California, Caravelle, Kombi and all other van derivatives.
with Delphi ECU 2015 – 2020
> VW Transporter T6 2015-2019
> VW Transporter T6 .1 2019-2020
Confirmed engine codes: CXEB I CXEC I CXFA I CXGA I CXGB I CXHA
Can my T6.1 be tuned?
For T6.1 vans produced after approx March 2020, the ECU type changed to Bosch, meaning that these vehicles cannot yet be tuned.
To quickly check your T6.1 van, look under the bonnet for this electrical block. If it’s there, then it is the later Bosch ECU type – and therefore cannot be tuned with this software.
PDM-COMPATIBLE:
The new Transport 2.0 TDI tuning is fully compatible with the RacingLine PDM ‘Power Delivery Module’ and App-Connect mobile-phone flashing.
The Power Delivery Module allows you to access the RacingLine Performance Software calibration suite for your van. Quickly and safely reflash your Engine Control Unit (ECU) and/or DSG Transmission Control Unit (TCU) from wherever you are, whenever you want.
EXTRA FEATURES:
It’s not just the performance gains. Our RacingLine Software calibrations also include some nice added extra features for your van:
Speed Limit Removal
Dynamic Rev Limit Temperature Protection (from cold to hot)
Start/stop inversion – default to ‘off’ on startup
Revised Oil Temperature Management to keep temps lower
PDM ‘Flash at Home’ enabled
Theft Protect
30-day money-back guarantee
THEFT PROTECT:
Again, a new feature for the RacingLine Transporter 2.0 TDI calibration suite – only when used with our PDM system – is the Theft Protect function.
It takes just a moment to flash the van via the PDM or App-Connect with the Theft Protect map, and unlike any immobilisers the ECU is now effectively blank until you return to your van and reflash to Stage 1 (or stock).
Meaning that there is literally no way for your van’s engine to start.
DQ500 GEARBOX TCU TUNING:
The RacingLine TCU Dynamic Tuning for your van’s DSG gearbox is a great complement to ECU engine tuning to enhance the drivability of the DQ500 7-speed DSG transmission.
Take a read through here: