FLEX is an innovative tool for mechatronic workshops that fully supports the latest developments in the automotive tuning and repair market. Increase your productivity and bring your business up to the next level by adding this new customizable technology to your workplace.


Use your FLEX to easily tune, reprogram, upgrade or modify the software of most control units directly through the OBD socket of the vehicle. An internet connection gives you access to all the potential that the tool offers you. For advanced and repairing jobs, use the Flexbox module to program your control unit in BDM, Bootloader, JTAG and AUD modes. The device detects eventual connection or communication errors thanks to the concept of its state-of-the -art design.


Connect your vehicle to our most advanced technology through the variety of modes offered to you. With Flex you can manage engines, transmissions, safety features and infotainment units present in your vehicle in the most efficient way possible.



What vehicles you can tune? See a full list of vehicles

Full Bench Solution for ZF 8HP, 7DCT300, 9G-Tronic, DSG and S-Tronic

You can now re-program 7, 8, and 9-speed automatic transmissions with full access to the contents of Flash and EEPROM memories.

Magicmotorsport presents a worldwide exclusive solution for transmission repair and program in Full Bench mode for first and second generation ZF 8HP mechatronics such as 8HP45, 8HP50, 8HP55, 8HP65, 8HP70, 8HP75, 8HP76, 8HP90, and 8HP95 installed on Alfa Romeo, Alpina, Audi vehicles, BMW, Chrysler, Dodge, Iveco, Jaguar, Jeep, Land Rover, Rolls Royce, Skoda and many more.
FLEX version is now available with estimated processing times of thirty seconds for reading and one minute for writing a full backup of the drive.
A unique protocol is also available for programming the brand new BOSCH 9G-Tronic and GETRAG 7DCT300 automatic transmissions installed on Mercedes, Mini, BMW, and Renault brand vehicles, as well as for the recalibration of DSG and S-Tronic BOSCH such as DQ500, DQ381, and DQ380 equipped with Audi TT 2018 2.5 TFSI, Volkswagen T-Roc 2017 2.0 TFSI and Volkswagen Golf 1.5 TSI 2020, with the possibility of full access from the electronics connector.

How to clone BMW MDG1 ECUs

How to program MD1 and MG1 VAG in OBD

How to read & write BOSCH MDG1 ECUs

How to use FLX2.16 FLEXBox to BMW MDG1 Cable

How to read and write edc17 in bench mode